Effects of Different Chemical Disinfectants on Physical Properties of Denture Base Acrylic Resin Material

Basit Öğe Kaydı
dc.contributor.authorBaysal, Nurten
dc.contributor.authorYılmaz Savaş, Tuba
dc.contributor.authorErol, Barıs Filiz
dc.contributor.authorErdogan, Hilal
dc.contributor.authorSakallı, Onur Altuğ
dc.contributor.authorBüyükbaş, Nesrin
dc.date.accessioned2024-09-10T07:38:47Z
dc.date.available2024-09-10T07:38:47Z
dc.date.issued2023en_US
dc.departmentKapadokya Üniversitesi
dc.description.abstractStatement of the problem: There is still a lack of data regarding the ef-fects of exposure to different chemical disinfectants on the color stability, light translucency, and surface roughness of dentures is limited.
dc.description.abstractObjective: This study aims to investigate the impact of six different chemical disinfectants on the color change, translucency, and surface roughness properties of heat-polymerized denture base acrylic resin.
dc.description.abstractMaterial & Methods: Totally 70 rectangular blocks (10×10×2 mm) were polymerized from the heat-polymerized acrylic denture base resin material. The surfaces of the specimens polished with 600- and 1200-grit waterproof abra-sive paper. Each specimen were immersed in six denture cleansers. The total immersion time of a specimen in selected chemical disinfectant was 36 hours. Color changes, translucency and, surface roughness were measured after im-mersion process. The results were statistically analyzed with 1-way ANOVA and the Tukey honestly significant difference (HSD) test (?=.05).
dc.description.abstractResults: According to the results of the 1-way ANOVA test, significant differences were observed in the ?E00, TP00 and Ra properties among the acrylic resin groups following immersion in chemical disinfectants (P<0.05). ?E00 value of the CG group was significantly higher than that of the NS, SH, G, and E groups (P<0.05). The TP00 values of the NS and G groups were demonstrated significant differences compared with C group (P<0.05). The Ra values of the SH, SP, G, CG and, E groups were significantly increased after immersion pro-cess, in comparison with C and NS groups (P<0.05).
dc.identifier.citationBaysal, Nurten., Savas, Tuba Yılmaz., Erol, Barıs Filiz., Erdogan, Hilal., Sakallı, Onur Altuğ. & Büyükbaş, Nesrin. “Effects of Different Chemical Disinfectants on Physical Properties of Den-ture Base Acrylic Resin Material”. Acta Stomatologica Cappadocia. 3;2 (December 2023): 86-98
dc.identifier.endpage98en_US
dc.identifier.issue2en_US
dc.identifier.startpage86en_US
dc.identifier.urihttps://doi.org/10.54995/ASC.3.2.3
dc.identifier.urihttps://hdl.handle.net/20.500.12695/2834
dc.identifier.volume3en_US
dc.institutionauthorSakallı, Onur Altuğ
dc.institutionauthorBüyükbaş, Nesrin
dc.language.isoen
dc.publisherKapadokya Üniversitesi Yayınları
dc.relation.ispartofActa Stomatologica Cappadocia
dc.relation.publicationcategoryMakale - Uluslararası - Editör Denetimli Dergi
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectChemical Disinfectants
dc.subjectColor Stability
dc.subjectTranslucency
dc.subjectSur-face Roughness
dc.titleEffects of Different Chemical Disinfectants on Physical Properties of Denture Base Acrylic Resin Material
dc.typeArticle

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim
İsim:
4.pdf
Boyut:
561.2 KB
Biçim:
Adobe Portable Document Format
Açıklama:
Makale / Article
İndir
Lisans paketi
Listeleniyor 1 - 1 / 1
[ X ]
İsim:
license.txt
Boyut:
1.44 KB
Biçim:
Item-specific license agreed upon to submission
Açıklama:
İndir

Koleksiyon

ASC - Makale Koleksiyonu